 |
| Premium Drapery Lining |
 Classic Sateen |
| Ruby Plus Sateen |
| Classic Napped Sateen |
| Satinsheen |
| Cotton Deluxe |
 |
| Value Lining |
| Linit |
| Luster |
| Stainguard |
|
| Blackout Lining |
| OutBlack |
| OutBlack Lyte |
| Imperial Eclipse |
| Suedeline |
| Apollo Blackout |
|
| Interlining |
| English Bump Cloth |
| Heavy Flannel |
| Good Flannel |
|
| Flame Retardant Lining |
| Apollo Blackout - FR |
| Banguard |
| Flame-Trol |
|
|
| Workroom Supplies |
| Crinoline |
| Hook and Loop |
| Cords and Tape |
| Cord Tassels |
| Cord Locks |
| Cord Cleats |
| Cord Pulleys |
| Rings |
| Weights |
| Piping Cord |
| Pin-On Hooks |
| Zipper Slides |
| Drapery Batons |
| Snap Tape |
| Snap Tape Accessories |
| Angle Irons |
| Screw Eyes |
The high cost of heating and cooling a home is a major concern in today's economy. Now you can offer your customers a breakthrough product that actually raises the R-Value of a home, and helps cut energy costs as it increases living comfort.
Uncovered windows can cause as much as 40% of a home's energy loss.
For maximum energy saving benefit, drapes should extend at least 4 inches past the window on all four sides.
Select TempAssure Lining Solutions based on the type and weight of drapery fabric used, degree of light control needed, noise control, UV penetration and the position of the widows in the home.
Uncovered windows can cause as much as 40% of a home's energy loss.
For maximum energy saving benefit, drapes should extend at least 4 inches past the window on all four sides.
Select TempAssure Lining Solutions based on the type and weight of drapery fabric used, degree of light control needed, noise control, UV penetration and the position of the widows in the home.
Temp-Assure Linings With Unlined Fabrics |
Layers Used (Includes Face Fabric) |
% Improvement vs Unlined Drapery |
| Outblack | 2 | 43% |
| Ruby Plus Sateen | 2 | 57% |
| Classic Napped Sateen | 2 | 80% |
| Heavy Flannel | 3 | 303% |
| Heavy Flannel & Ruby Plus Sateen | 3 | 310% |
Identical drapery fabric used as face material for all tests.
Results are the average of three separate, but identical, independent laboratory tests performed on each combination above as required under ASTM-D 1518 Standards.
Results are the average of three separate, but identical, independent laboratory tests performed on each combination above as required under ASTM-D 1518 Standards.
